Hardware manual

Windows XP Embedded Refelence Manual
A-4
5.Limited Warranty
(1) DMC guarantees that 90 days after the licensee purchased the product, neither material nor manufacturing flaws shall
be found at the medium where the product has been recorded or stored. If any errors related to the material or
manufacturing is recognized when the product is installed, we shall replace the medium used to install the product on
the condition that we are notified of it within the guaranteed period.
(2) DMC shall grant the right to use the product at a state it has been supplied without explicit or implicit guarantee
except for replacement of the medium containing product described in the above clause. Further, we do not guarantee
that the product is suitable as useful for the licensee’s specific purpose of use and that execution of the product is
neither interrupted nor an error is found at its execution.
(3) The responsibility attributable to DMC based on this agreement is limited to replacement of the medium containing
the product, and DMC shall not assume any responsibility for the explicit or implicit guarantee including the other
legal warranty against a defect and a liability for reparation given from a third party to the licensee regarding the
licensee’s profit loss caused by the product, damage arising from a special circumstance and the damage against data
or intangible property right.
6.License’s obligation
The licensee shall recognize that the product shall possess the confidential information or property information including
the intangible property right protected by the Copyright Act and shall not take the following actions:
(1) Use and copying of the product against the terms of the license and disassembling, reverse engineering, and
modifying the product.
(2) Deletion and/or change of display of the intangible property right including the copyright displayedon the medium
containing the product.
7.Restrictions on Export
When the product is subjected to the regulation of the Foreign Exchange and Foreign Trade Control Act and the laws and
regulations accompanying it and the Export, the licensee shall observe the corresponding laws and regulations and rules.
DMC Co.,Ltd.
http://www.dmccoltd.com
Hironokougyoudanchi, Hirono-machi, Futaba-gun, Fukushima
979-0401, Japan
Phone: [phone] Fax: [phone]