Hardware manual

Chapter 1 Windows XP Embedded
1-15
7 Displaying keyboard on the screen
The KeyClick32 software keyboard made by IN-fINITY soft can be used. Please surely read the License
agreement on the appendix before using it.
)"1 [IN-fINITY soft KeyClick32] Agreement" (Page A-2)
When changing font size, set the setting referring the following diagram.
7.1 Changing input font size procedure
(1) When using Japanese/English version, start with [Start]-->[All program]-->[KeyClick_J] (Japanese ver-
sion) or [KeyClick_E] (English version) (Executable file is C:\Proface\KeyClick_J\KeyClick.exe or
C:\Proface\KeyClick_E\KeyClick.exe) When using Multilanguage version, start with [Start]-->[All
program]-->[KeyClick]. (Executable file is C:\Proface\KeyClick\KeyClick.exe
(2) When changing font size, set the setting referring the following diagram.
• Only Japanese and English are supported.
When operating the key input from the touch panel in the language except the above mentioned,
use Microsoft’s Screen Keyboard.
• It cannot be used for password input when starting this unit.
• It cannot be used for command prompt.
• Before setting KeyClick, disable the Write Filter. When the Write Filter is enabled, the change is
not reflected.
Enabling the Write Filter after changing the setting is recommended.
)"4.1 Write Filter Settings Procedure" (Page 1-7)
• Changing the settings of the KeyClick requires the power user’s or higher authority.
(1) Click here and display dialog for changing font size.
(2) Click PW and end KeyClick. Restart KeyClick and