Hardware manual
1
Preface
Thank you for purchasing Pro-face’s Windows XP Embedded (Hereafter referred to as the “XPE”).
Before using the XPE, be sure to read this manual thoroughly to familiarize yourself with the XPE’s operation procedures
and functions.
Supported Model List
* The last digit of the volume label indicates a version number which corresponds to the software revision.
* The newest manual, Driver and Utility can be downloaded from the Digital Electronics Corporation’s homepage.
Also often questions and helpful informations are uploaded as Q&A to Digital Electronics Corporation’s homepage.
Please refer them to the purpose of usage. http://www.pro-face.com/otasuke/
© Copyright 2007 Digital Electronics Corporation. All rights reserved.
Windows is a registered trademark of Microsoft Corporation.
All other trademarks and registered trademarks are property of their respective owners.
Series Unit model Unit revision Supported CF card model Volume label
PS-3450A
PS-3451A
PS3450A-T41
PS345*A-T41-24V
No Rev.
or later
PS345XA-XPE1G-JE-BLD 345XAXPEJE1 or later
PS345XA-XPE1G-ML-BLD 345XAXPEM1 or later
PS-3000B
PS-3001B
PS3000-BA
PS3001-BD
No Rev.
or later
PS345XA-XPE1G-JE-BLD 345XAXPEJE2 or later
PS345XA-XPE1G-ML-BLD 345XAXPEM2 or later
PS-3650A
PS-3651A
PS365*A-T41
No Rev.
or later
PS365XA-XPE1G-J1-BLD 365XAXPEJ3 or later
PS365*A-T41-24V PS365XA-XPE1G-M1-BLD 365XAXPEM3 or later
PS-3710A
PS3710A-T41
No Rev.
or later
PS3710A-XPE1G-JE-BLD 3710AXPEJE1 or later
PS3710A-T41-24V PS3710A-XPE1G-ML-BLD 3710AXPEM1 or later
PS-3711A
PS3711A-T41
No Rev.
or later
PS3711A-XPE1G-JE-BLD 3711AXPEJE1 or later
PS3711A-T41-24V PS3711A-XPE1G-ML-BLD 3711AXPEM1 or later
PL-6930T
PL-6931T
PL-7930T
PL-7931T
PL*93*-T41
PL*93*-T42-CM
PL*93*-T42-PM
No Rev.
or later
PLX930-XPE1G-J1-BLD PLX930XPEJ4 or later
PLX930-XPE1G-M1-BLD PLX930XPEM4or later
NOTE
1. It is forbidden to copy the contents of this manual in whole, or in part, without the permission of the Digital Elec-
tronics Corporation.
2. The information in this manual is subject to change without notice.
3. This manual was written with care; however, if you should find any error or omissions, please contact Digital
Electronics Corporation and inform them of your findings.
4. Regardless of the above clause, Digital Electronics Corporation shall not be held responsible for any damages or
third-party claims for damages or losses resulting from the use of this product.