Hardware manual

Chapter 1 Windows XP Embedded
1-11
(4) Click [OK] and the unit is rebooted automatically.
(5) BIOS is displayed. While BIOS is displayed, press [F2]key.
Turn off the power supply after BIOS setup screen is displayed and copy the CF card.
(6) Reboot by using the CF card which you have copied. The security ID will be changed during the first
reboot.
(7) After the security ID is changed, the XPE is restarted automatically.
• It may take a long time to boot but since changing the security ID, do not turn off the
power supply.
• After restart, Write Filter becomes effective and it’s not necessary to set it again.
• When the security ID is changed, the MACHINE_NAME is changed and therefore the Event
Error occurs.
There are no affects for this error.