User manual

6–4
Chapter 6 – Initializing the LT
LT Series User Manual
Character String Data ordering varies, depending on the manufacturer of the
external device. Set up the Character String Data order to match that of the corre-
sponding external device.
Set the CHARACTER STRING DATA MODE to match that of the corre-
sponding external devices. Only the external devices — and not their
internal device addresses or Tag settings — are available for setup.
CHAR. STRING DATA MODE
Set up the CHARACTER STRING DATA MODE that corresponds to that of your
external device, as specified in the following table.
(I) Data Device Storage Order
(II) Byte Storage Order (LH/HL), using single words
(III) Word Storage Order (LH/HL), using double words
DATA TYPE OF SCREEN NO.
This setting specifies whether BIN or BCD format numbers are used when making
screen changes.
(I) Data Device
Storage
Order
(II) Byte Storage
Order (LH/HL),
using single words
(III) Word Storage Order
(LH/HL), using
double words
Character
String Data
Mode
LH order
4
HL order
2
LH order
5
HL order
1
LH order
6
HL order
7
LH order
8
HL order
3
Storage from
Start Data
Storage from
End Data
CHARACTER STRING DATA MODE (1–8) List
LH order
HL order
LH order
HL order
6.3.2 CHARACTER STRING DATA SETUP