User manual

5–4 LT Series User Manual
Chapter 5 – OFFLINE Mode
Select the desired menu item by touching the corresponding option.
Each Main Menu item is used as follows:
INITIALIZE
Setup items control the LT unit.
SCREEN DATA TRANSFER
Transfers screen data between the LT Editor/C-Package and the LT.
SELF-DIAGNOSIS
Checks to see if there are any problems with the LT System or Interface (I/F).
RUN
Starts the LT operation.
For more information about INITIALIZE, see Chapter 6 –
“Initializing the LT”.
For more information about TRANSFER SCREEN DATA, refer to the
LT Editor Operation Manual – Screen Creation Guide (included
with the LT Editor software) and the GP-PRO/PBIII Operation
Manual (included with the C-Package software).
For more information about the SELF-DIAGNOSIS and RUN features,
see Chapter 7 – “LT Run Mode and Errors.”
The Main Menu contains the following menu items: INITIALIZE, TRANSFER
SCREEN DATA,
SELF-DIAGNOSIS, and RUN.
The settings for each menu item, below, must match the corresponding external
device, for the LT to communicate properly.
Entering OFFLINE mode calls up the following screen.
5.2 OFFLINE Mode - Main Menu