User manual

4–2 LT Series User Manual
Chapter 4 – OFFLINE Mode
1 The LT must be prepared for the data transfer process before the data can be
transferred. To do this, be sure to download the system program and the protocol
program from the LT Editor/C-Package to the LT.
Transfer screen data from your PC via the LT Editor/C-Package.
For details about the operation of the LT Editor/C-Package, refer to
the LT Editor Operation Manual – Screen Creation Guide (included
with the LT Editor software) and the GP-PRO/PBIII Operation
Manual (included with the C-Package software).


 Completing Data Transfer
*1
When transferring screen data from the LT Editor/C-Package, the screen automati-
cally switches to TRANSFER SCREEN DATA. If the screen does not switch to
TRANSFER SCREEN DATA, select TRANSFER SCREEN DATA mode.


 Transferring Data to a New LT
Connect the LT to your PC with the data transfer cable, and then turn the LT ON.
The “Read me first” screen appears on the LT unit, and then automatically
changes to the TRANSFER SCREEN DATA screen. After this screen appears,
you can transfer screen data from the LT Editor/C-Package to the LT.
4.2 Transferring Screen Data