User manual

Chapter 3 – Installation and Wiring
3–18 LT Series User Manual


 CUSTOM FT190SP Printer


 Conversion Cable Wiring Diagram


 Printer Type Settings Area – Type and Keyboard SIO Baud Rate
Type: Epson (High Quality/High Speed)
Keyboard SIO Baud Rate: 19200bps


 Printer Settings
SET UP DEFAULT:
40 COLUMNS (font 9x24)
PRINT = REVERSE
MODE = LITTLE
FONT 2
CR-LT IGNORE CR
SPEED/CURRENT = LOW
BUFFER 1K BYTE
SERIAL PORT SELECTED
BAUD RATE = 9600
PROTOCOL = 8, N, 1
FLOW CONTROL = XON-XOFF
PRINT KEY TRANSMIT $0D


 Available Printout Features
The following table lists printout features available with the I-ASCII font.
Japanese, Korean, Taiwanese, and Chinese fonts are not available.
Pin No. Signal Name Pin No. Signal Name
1DTR
2TXD 2TXD
3RXD 3RXD
4DSR 4RTS
5GND 7GND
6RTS 20DTR
7CTS
8RTS
9
PrinterData Transfer Cable (Dsub 9-Pin)
Japanese I-ASCII Korean / Taiwanese / Chinese
Screen Hard Copy X X X
Print Alarm Message X O X
Real-time Log Data Print X O X
Print Log Data
(Single Block)
XO X
AvailabilityPrintout Features