User manual

3–17
Chapter 3 – Installation and Wiring
LT Series User Manual


 Available Printout Features
Printout features available with the LT unit are as follows:


 Printer Type Settings Area – Type and Keyboard SIO Baud Rate
Type: EPSON (High Quality / High Speed)
Keyboard SIO Baud Rate: 9600bps


 Printer Settings
Switch Function ON/OFF
SW1-1 Data reception error Prints"?" marks
SW1-2 Receive buffer capacity Approx. 1K bytes
SW1-3 Handshaking XON/XOFF
SW1-4 Word length 8bits
SW1-5 Parity check No
SW1-6 Parity selection Odd
SW1-7 Baud rate 9600bps
SW1-8 Busy condition Sets the printer to BUSY when it is offline or
when the receive buffer is full
DIP Switch Set 1
Switch Function ON/OFF
SW2-1
Print column selection 7x9
font / 9x9 font
40/33
SW2-2
SW2-3
SW2-4
SW2-5
SW2-6
SW2-7 I/F pin 6 reset signal Disabled
SW2-8 I/F pin 25 reset signal Enabled
DIP Switch Set 2
Internal use. Setting must not be changed (fixed to OFF).
Internal use. Setting must not be changed (fixed to OFF).
Internal use. Setting must not be changed (fixed to OFF).
Undefined.
Internal use. Setting must not be changed (fixed to OFF).
Japanese I-ASCII Korean / Taiwanese / Chinese
Screen Hard Copy X X X
Print Alarm Message X O X
Real-time Log Data Print X O X
Print Log Data
(Single Block)
XO X
AvailabilityPrintout Features