User manual

3–1LT Series User Manual
Chapter
3 Installation and Wiring
1. Installation
2. Wiring Cautions
3. Tool Connector
3.1 Installation
3.1.1 Installation Procedures
Follow the steps in this section to install the LT.
Pro-face strongly recommends that you use the installation gasket to absorb
vibration as well as repel water.
Place the display panel of the LT face down on a level surface. Make sure that the
LT unit’s installation gasket is securely fitted into the groove that runs around the
perimeter of the panel’s frame.
For details about installing the gasket, see Section 8.1.2 – “Installa-
tion Gasket Check/Replacement.”


 Attaching the Installation Gasket
Installation
Gasket
Before installing the LT into a cabinet or panel, check that the Installa-
tion gasket is securely attached to the unit.