User manual

LT Series User Manual 2–9

Chapter 2 – Specifications

The following table specifies the signals of the Flex Network I/F Connector

(included with the LT unit). Use these specifications to connect the LT to the Flex

Network I/O unit using the Network Communication Connector included in the

LT unit’s packing box.

 Flex Network I/F Connector

 Flex Network Communication Cable

Use the following Flex Network Communication Cable when connecting to the

Flex Network Unit.

 Flex Network Communication Connector

The Flex Network Communication Connector is included with the LT unit, and is

also available as an optional maintenance item, such as FN-IFC01.

Section 1.3 – “Accessories”

For detailed information about the Flex Network, refer to the Flex

Network User Manual.

Pin # Signal Name Condition

6 SLD CH 2 Shield Line (SLD)

5 TR- CH 2 Communication Data (TR-)

4 TR+ CH 2 Communication Data (TR+)

3 SLD CH 1 Shield Line (SLD)

2 TR- CH 1 Communication Data (TR-)

1 TR+ CH 1 Communication Data (TR+)

2.3.2 Flex Network Interface (Type B/Type B+/Type C)

Model Length per Unit

FN-CABLE2010-31-MS 10 m

FN-CABLE2050-31-MS 50 m

FN-CABLE2200-31-MS 200 m