User manual

Chapter 1 – Introduction
LT Series User Manual1–10


 Optional Items


 Optional Maintenance Items
The following items are included in the LT unit’s packing box, and are also sold separately.


 Positioning Units
Product Name Model No. Description
Flex Network
Single-Axis Positioning Unit
FN-PC10SK41
Both of this unit and GLC/LT can store positioning data. Motor
driver connection cable(FN-PC10CB01) is required.
Flex Network
Teaching Loader for Single-
Axis Positioning Unit
FN-PC10LD41
Programmer for Single-Axis Positioning Unit. Allows entry, editing
and operation checking of high-precision positioning data
(5m cable included)


 High-Speed Counter Unit
Product Name Model No. Description
Flex Network
High Speed Counter Unit
FN-HC10SK41
High performance High-Speed counter that can easily
change counter input types. Can create both a wide range
of data and cam output.
Item Model No. Description
Screen Protection Sheet
(5 sheets/set)
GP37W2-DF00
Disposable protective and dirt-resistant sheet for the LT
unit's screen. The LT unit's touch panel can be used with
this cover sheet attached.
Single-Axis Motor Driver
Connection Cable
FN-PC10CB01 (1m)
Connects the Flex Network single-axis positioning unit and
the servo and stepping drivers.
Product Name Model No. Description
Installation Fastener
(4 fasteners/set)
GP070-AT01 Fasteners to attach the LT to a panel.
Installation Gasket GP37W2-WP00-MS
Provides a moisture-resistant seal when installing the LT.
Same as the seal included in the LT unit's original
equipment package.
Flex Network
Communication Cable
Connector
FN-IFCN01
Connector is attached to the Flex Network I/F unit. Enable
s
the connection of the Flex Network Communication
Cable.
Single Axis Teaching Loader
Cable
FN-LD10CBL (5m)
Connects the Single-Axis Positioning unit to the Single-
Axis Teaching Loader.
DIO Connector
(Spring Type)
GLC-DIOCN03
Connectors (terminal screws) for "FN-XY32SKS41", "FN-
XY32SCS41" units. Easy-to-use spring-clamp type.


 Analog Units
Product Name Model No. Description
Flex Network 2-Channel
Analog/Digital Conversion
FN-AD02AH41
Converts 2-channnel analog signals to digital signals at
12-bit resolution.
Flex Network 2-Channel
Digital/Analog Conversion
FN-DA02AH41
Converts 2channel 12-bit digital signal to analog signal
and sends output.
Flex Network 4-Channel
Analog/Digital Conversion
FN-AD04AH11
Converts 4-channnel analog signals to digital signals at
12-bit resolution.
Flex Network 4-Channel
Digital/Analog Conversion
FN-DA04AH11
Converts 4-channel 12-bit digital signal to analog signal
and sends output.