User manual
Chapter 1 – Introduction
LT Series User Manual1–8
The following items are optional LT products (sold separately).
Available Software*
1
Tool Connector
Flex Network Interface (Type B/Type B+/Type C)
I/O Interfaces (Type A1/Type A2/Type B+)
1.3 Accessories
1 The software that can be used will vary depending on the type of unit.
Software Compatibility List
1 Software version limitations apply.
For details, USB Data Transfer Cable Installation Guide.
Product Name Model No. Description
Data Transfer Cable
GPW-CB02
USB Data Transfer
Cable
*1
GPW-CB03
Connects the LT to a PC; transfers screen data and user
program(s).
Product Name Model No. Description
LT Editor
GLCLT-ED01W-V**
C-Package 03 or later
GPPRO-CNT03W-P03
Software used to create the LT unit’s screen data and to
develop a logic program.
Product Name Model No. Description
GLC100-DIOCN01
Connector (must be soldered) and connector cover, including five
pieces of FCN-361J040-AU (connector) and FCN-360C040-B
(connector cover). Manufactured by Fujitsu Component Corp.
GLC-DIOCN02
Crimp connector for ribbon cable. (5/set)
Fujitsu Component Ltd.
FCN-367J040-AU/F
3.5m cable that includes Fujitsu Component Ltd.'s pre-attached
connector (FCN-361J040-AU) and connector cover FCN-
360C040-B.
Power/Common: AWG#22/Approved for 7A current (red/black)
I/O Signal: AWG#24/Approved for 5A current (yellow/green)
Includes wire marking cover (not terminated)
3.5m cable that includes Fujitsu Component Ltd.'s pre-attached
connector (FCN-361J040-AU) and connector cover FCN-
360C040-B.
Power/Common: AWG#22/Approved for 7A current (green)
I/O Signal: AWG#24/Approved for 5A current (green)
Includes wire marking cover (not terminated)
The same reference number as the connector No. is used for the
wire marking cover in the description.
DIO Connector
DIO Cable
CGP070-ID11-M
GLC000-DIOCB11-MS
Product Name Model No. Description
FA-CABLE2010-31-MS (10m)
FN-CABLE2050-31-MS (50m)
FN-CABLE2200-31-MS (200m)
Flex Network
Communication Cable
Connect GLC/LT units with Flex Network units.