User manual

Chapter 1 – Introduction
LT Series User Manual1–6
LT Interfaces
c Tool Connector
d I/O Connector (Type A1/Type A2/Type B+)
e Flex Network Interface (Type B/Type B+/Type C)
f Serial Interface (Type C)
External Device Interface (for Temperature Controllers, Inverters, etc.)
g RS-232C Port
h RS-422 Port
Personal Computer Interfaces
i Printer Interface
1 For the range of compatible PCs, refer to the
LT Editor CD Jacket (included with the LT Editor software),
C-Package CD Jacket
2 The software that can be used will vary depending on the type of unit.
Software Compatibility List
3 Software version limitations apply.
For details, USB Data Transfer Cable Installation Guide.
4 See Page 1-7 for recommended units.
5 Certain types and models of external devices cannot be connected.
LT Editor Device Connection Manual (included with the LT Editor
software), GP-PRO/PBIII Device/PLC Connection Manual (in-
cluded with the C-Package software)
6 For information about compatible external device types, refer to the
LT Editor Device Connection Manual (included with the LT Editor
software), GP-PRO/PBIII Device/PLC Connection Manual (in-
cluded with the C-Package software)