User manual

6–18
Chapter 6 – Initializing the LT
LT Series User Manual
FONT SETTING
Select the font type that is displayed on the LT unit’s screen during operation.
KANJI FONT QUALITY
Designates the font display quality for enlarged characters.
Differences in FONT SETTINGS:


 When FONT SETTING is set to [JAPAN]
Single-byte characters will remain 8x16-dot characters when enlarged.
Double-byte characters are displayed as:
Standard Characters are displayed using 16x16-dot “blocks.” When enlarged,
this font will remain a 16x16-dot character.
HIGH When enlarged to double size, Level 1 JIS Kanji Code characters
display as 32x32-dot characters. Level 2 JIS Kanji Code characters
will remain 16x16-dot characters.
HIGH (1, 2) When enlarged to double size, both Level 1 and Level 2 JIS Kanji
Code characters display as 32x32-dot characters.


 When FONT SETTING is set to any other type, such as [CHINA],
[I-ASCII], [KOREA], or [TAIWAN]
Standard Half-size (single-byte) characters display as 16x8-dot characters. Full-
size characters, regardless of the display size used, always display as
16x16-dot characters. When enlarged, this font will remain a 16x16-
dot character.
6.9 FONT SETTING
Use this screen to set the font that is displayed by the LT.