Specifications

ManualsBrandsPro-face ManualsComputer equipmentLT Series

Specifications

Item

All equipment in these lists has been tested with GP-PRO/PBIII C-Package03 software.

(as of February 2004)

Important:

• When extending the Pt100 input wire, make sure that the three conductors have exactly the same

resistance and length. Do not route this wire near high-voltage, high-current, high-frequency

cables (such as those for inverters) or power cables. Also, do not bundle it with any of these

cables; place them in separate wiring ducts.

• Pt100 input uses three conductors to eliminate wiring resistance and provide consistently precise

measurement.

• When wiring external power to the Analog Input connector, connect 24V to No. 4 pin, and 0V to

No. 5 pin.

Important:

• Do not route thermocouple input wiring near high-voltage, high-current, high-frequency cables

(such as those for inverters) or power cables. Also, do not bundle it with any of these cables;

place them in separate wiring ducts.

• When extending the thermocouple input, use the specified (J type, K type) compensating lead

wire. Because long compensating lead wires are subject to noise, the length should be kept

as short as possible.

• Make sure the compensating lead wire is connected with the correct polarity. If the polarity is

reversed, temperature measurements will be incorrect.

• There is no insulation between thermocouple channels. Use insulated

(non-grounded) thermocouples.

• When wiring external power to the Analog Input connector, connect 24V to No. 4 pin, and 0V to

No. 5 pin.

*1 The indication vaires depending on the temperature controller functions.

*2 The value varies depending on the functional specification. Depending on the functional specification, the is omitted.

*3 Communication is possible via the LT Series internal memory regardless of the external controller (PC,Single-board controller,etc,),

*1 A connector terminal block is included with the unit, and is also available separately as a maintenance option.

Applicable connector: Weidmuller BL3.5/6LH 6-terminal screw clamp. Max. connectable wire size: 1.6 mm (AWG#14)

*1 A connector terminal block is included with the unit, and is also available separately as a maintenance option.

Applicable connector: Weidmuller BL3.5/6LH 6-terminal screw clamp. Max. connectable wire size: 1.6 mm (AWG#14)

Pin Assignments*2

Pin No.

Terminal Name Condition

PT1 A

PT1 B

PT2 A

PT2 B

Pt100 Input Ch1

Pt100 Input Ch2

Pin Assignments*2

TC1+

TC1-

TC2+

TC2-

TC3+

TC3-

Thermocouple Input Ch1

Thermocouple Input Ch2

Thermocouple Input Ch3

Pin No.

Terminal Name Condition

*1 Temperature conversion data is indicated as the measured value x10.

*2 Except for delay time, depending of the LT unit’s scan time.

*1 Temperature conversion data is indicated as the measured value x10.

*2 Except for delay time, depending of the LT unit’s scan time.

Subjected Resistance

Temperature Sensor

Pt100

Error Detection

Disconnect Processing

Wiring

Insulation Resistance

Additional Function

Input

Characteristics

Input Part –

Internal Part

Measurable

Temperature Range

Accuracy

External Wiring Length

Conversion Time

No. of Input Channels

Temp. Conversion Data

Insulation

Channel –

Channel

Power for analog (DC24V) 1st side and 2nd side (AC500V)

Linearize pulses

Approx. 85ms x filter frequency (1 to 64) *2

No Insulated

2 Channels

Celsius: -50°C to +400°C Fahrenheit: -58 F to +752 F

Celsius: -500 to +4000 Fahrenheit: -580 to +7520

±1.0% (Full Scale)

Each Channel: 50m max.

Photocoupler Insulated

Temperature conversion data when exceeding measured

temperature range

Exceeding the upper limit: 32767 Exceeding the lower limit: -32768

3-wire method

Temperature conversion data is 32767

Celsius (°C) Fahrenheit (F)

Specifications

Item

Subjected Resistance

Temperature Sensor

Error Detection

Disconnect Processing

Insulation Resistance

Additional Function

Input

Characteristics

Input Part –

Internal Part

Measurable

Temperature Range

Accuracy

External Wiring Length

Conversion Time

Number of Input Channels

Temperature Convertion Data*1

Insulation

Channel –

Channel

Thermocouple (J/K Type)

Power for analog (DC24V) 1st side and 2nd side AC500V

Linearize

Temperature conversion data is 32767

Each Channel: 50m max. (by compensating conductors)

Approx. 170ms x filter frequency(1 to 64) *2

No Insulated

Celsius: -100°C to +700°C, Fahrenheit: -148 F to +1292 F

Celsius: -100°C to +1200°C, Fahrenheit: -148 F to +2192 F

3 Channels

±1.0% (Full Scale)

Photocoupler Insulatied

Temperature conversion data when exceeding measured

temperature range

Exceeding the upper limit: 32767 Exceeding the lower limit: -32768

Celsius (°C) Fahrenheit (F)

J Type

K Type

Celsius: -1000 to +7000, Fahrenheit: -1480 to +12920

Celsius: -1000 to +12000, Fahrenheit: -1480 to +21920

J Type

K Type

Manufacture

Series Name

Model

Manufacture

Series Name

Model

Manufacture

Series Name

Model

#1 MODBUS protocol supported. #2 RKC protocol supported.

Yokogawa

M&C

Yamatake

RKC

Instrument

OMRON

Shimaden

Chino

Mitsubishi

Electric

Fuji

Electric

Toshiba

Schneider

Inverter

Yasukawa

Electric

Yasukawa

Electric

Matsushita

Electric

JT Enginnering

HITACHI

Industrial Equipment

Systems

Shinko

Technos

Fuji Electric

Toho Denshi

Shimaden

Fenwal Controls

of Japan

UT100

UT2000

UT3000

GREEN

SERIES

SDC

DMC

SR-Mini

SR-Mini HG

SRX

REX-F

LE100

SRV

MA900

HA900

HA400

SA200

E5_N Digital

Temperature Controller

SR80

E5_N Digital

Temperature

Controller

SR90

MR13

EM70

FREQROL-A500

FREQROL-A500L

FREQROL-E500

FREQROL-F500

FREQROL-F500L

FREQROL-S500

FVR-E11S

FVR-C11S

VF-S9

VF-nC1

VF-S11

MINAS-A

JE-70

MINAS-S

VF-A7

L300P

FREQROL-B, B3

FRENICS5000G11S

FRENICS5000P11S

Varispeed G7/F7

SJ300

VS mini V7/J7

SD16

FP93

FIR

FCL

PC-900

PCD-33A

JCR-33A

JIR-301-M

Microcontroller-X

(PXR)

DCL-33A

TTM-004

TTM-X04

TTM-10L

TTM-00B

TTM-100B

TTM-110B

TTM-120

TTM-300

TTM-300B

TTM-1020

SR253

TTM-110

JCD-33A

Modular, Dual Loop

Temperature controller

LT Series Built-in Interface Specifications and Connectable Controllers