Specifications
16 input points and 16 output points make for easy integration
into your current system
Tool Connector
Connectors
Bar Code Reader
DIO I/F
Equipped
with DC24V
32-point
input/output
Built-in DIO (Source output) TypeBuilt-in DIO (Sink output) Type
200m (6Mbps)x 2ch
100m (12Mbps) x 2ch
Flex Network
I/F
200m (6Mbps)x 2ch
100m (12Mbps) x 2ch
Flex Network I/F
Remote I/O
(
Flex Network
)
System
Maximum 1008 I/O Points
Built-in Remote I/O (Flex Network)
Further expansion with the SIO I/F, in addition to the Remote I/O (Flex
Network)
Built-in SIO + Remote I/O (Flex Network)
Further expand your Remote I/O (Flex Network) system with built-in
32-point DIO
Built-in Remote I/O (Flex Network)
External controllers
PC Inverter
Microcomputer
board
Temperature
controller
*1 Used for switches, such as manual/auto (2
points), auto start, stop, stop, buzzer, alarm
reset , jog forward, jog backward, raise, lower,
continuous operation, and material
replenishment complete.
*2 Used for lamps indicating auto operation,
motor overload, error, lower error, stop error,
pneumatic error, material jam, and no material.
I/O points used for panel
operation and display
I/O points used for
equipment control
PLC
with 50 I/O points
LT Series (Type A/B+)
with 32 I/O points
12 input points *
1
9 output points *
2
29 points available
Built-in graphic display and touch panel
replace switches and lamps.
32 points available
All avilable
for device
control!
Data Transfer Cable
( COM ) GPW-CB02
( USB ) GPW-CB03
*1
Conversion Cable
*1 Limited by software version
Only when using
GPW-CB02
(provided by user)
Only when using
GPW-CB02
Serial Printer
Printer
Tool Connecctor
Bar Code Reader
Data Transfer Cable
( COM ) GPW-CB02
( USB ) GPW-CB03
*1
Conversion Cable
Serial Printer
Printer
Tool Connector
Bar Code Reader
Data Transfer Cable
( COM ) GPW-CB02
( USB ) GPW-CB03
*1
Conversion Cable
*1 Limited by software version
(provided by user)
Serial Printer
Printer
Indicator Lamp
Sensor
LED
Switch
etc.
Connectors
DIO I/F
Tool Connector
Bar Code Reader
Data Transfer Cable
( COM ) GPW-CB02
( USB ) GPW-CB03
*1
Conversion Cable
Printer
etc.
Use the LT's
built-in Remote
I/O (Flex Network)
together with
• Single-axis Positioning Unit
• High-speed Counter Unit
• Analog Units
• DIO Units
Equipped
with DC24V
32-point
input/output
Flex Network Communication Cable
10m: FN-CABLE2010-31-MS
50m: FN-CABLE2050-31-MS
200m: FN-CABLE2200-31-MS
200m (6Mbps)x 2ch
100m (12Mbps) x 2ch
Flex Network
I/F
Remote I/O
(
Flex Network
)
System
Maximum 1008 I/O Points
Flex Network Communication Cable
10m: FN-CABLE2010-31-MS
50m: FN-CABLE2050-31-MS
200m: FN-CABLE2200-31-MS
Serial
I/F
Remote I/O
(
Flex Network
)
System
Maximum 1008 I/O Points
Flex Network Communication Cable
10m: FN-CABLE2010-31-MS
50m: FN-CABLE2050-31-MS
200m: FN-CABLE2200-31-MS
Use the LT's
built-in Remote
I/O (Flex Network)
together with
• Single-axis Positioning Unit
• High-speed Counter Unit
• Analog Units
• DIO Units
Use the LT's
built-in Remote
I/O (Flex Network)
together with
• Single-axis Positioning Unit
• High-speed Counter Unit
• Analog Units
• DIO Units
RS-232C/RS-422 Cable
Standard serial
interface allows you
to easily connect a PC,
single-board controller,
temperature controller,
inverter or other device
via an RS-232C or RS-
422 cable.
Indicator Lamp
Sensor
LED
Switch
Use Flex Network to connect up to 1008 points (63 nodes) over a
maximum of 400m (with 6Mbps, 200m x 2 ch).
*1 Limited by software version
Only when using
GPW-CB02
(provided by user)
*1 Limited by software version
Only when using
GPW-CB02
(provided by user)
05
LT Series System Design
LT Series System Design
06
See our Web site for LT Series system application examples.
5.7
inch
5.7
inch
5.7
inch
5.7
inch
5.7
inch
5.7
inch
5.7
inch