Hardware manual

LT-4201TM/4301TM Hardware Manual
95
Wiring Diagram
The figure describes the wiring diagram of the LTs digital inputs.
Terminal Blocks (see page 92).
F
ast Input/Standard Input:
D6LQNLQSXWV
SRVLWLYHORJLF
E6RXUFHLQSXWV
QHJDWLYHORJLF
,& , ,,

±
' & & '
E
D

±
,&
,&
, , , , , , , ,,,
' & ' & '
&'
& ' & ' &
E
D

±

±
,& , , ,, ,,,

±
& '' & ' & ' &
E
D

±
,
WARNING
UNINTENDED EQUIPMENT OPERATION
Do not connect wires to unused terminals or terminals marked “No
t Connected
(N.C.)”.
Failure to follow these instructions can result in death, serious injury, or
equ
ipment damage.
WARNING
UNINTENDED EQUIPMENT OPERATION
Use a single power source fo
r the sensor and actuator.
Failure to follow these instructions can result in death, serious injury, or
equ
ipment damage.