Hardware manual

LT-4201TM/4301TM Hardware Manual

USB Data Transfer Cable - USB Driver Installation

Important Information

Follow these instructions to avoid damage to the cable connector or the unit:

z Do not connect the USB data transfer cable until told to do so in the instructions.

z Insert the connector at the correct angle when connecting the USB data transfer

cable to the PC or to the unit.

z Hold the connector, not the cable itself when disconnecting the cable.

z Use the port designated during installation. If the cable is unplugged from the port

designated during installation and connected to a different port, the Operating

System (OS) will not recognize the new port.

z Restart the PC and quit all resident applications before reinstalling the software

if the installation does not complete successfully.

NOTE: F

or transfer methods, refer to the fol

lowing manual: GP-Pro EX Reference

Manual "Transferring project files via USB transfer cable".

USB Host Interface Characteristics

USB (Type A) Interface USB (mini-B) Interface

Connector USB 2.0 (Type A) x 1 USB 2.0 (mini-B) x 1

Power Supply Voltage 5 Vdc ± 5% –

Maximum Current

Supplied

500 mA –

Maximum Tran

smission

Distance

5 m (16.4 ft)