Hardware manual

LT-4201TM/4301TM Hardware Manual

Installing the Display module with spacer

The spacer, supplied in the accessory kit PFXZGMAK1 (sold separately), allows

mounting the product on a:

z steel sheet support with a thickness between 1 and 1.5 mm (0.039 in. and

0.059 in.)

z plastic support with a thickness between 1 and 3 mm (0.039 in. and 0.118 in.)

z glass fiber reinforced plastic with a thickness between 2 and 3 mm (0.078 in. and

0.118 in.)

The figure shows the assembly with the spacer:

(1) Display module

(2) Panel

(3) Spacer

(4) Display installation nut

(5) Anti-rotation tee