Hardware manual

LT-4201TM/4301TM (Modular Type Analog)
104
Digital Outputs
Overview
The rear module is equipped with 6 transistor outputs that you can manage
(see page 47).
Output Management Functions Availab
ility
The table describes the possible usage of th
e rear module outputs:
Fast Output Wiring Diagram
For additional information about fast output protection, refer t
o
Protecting Outputs
from Inductive Load Damage (see page 34).
DANGER
FIRE HAZARD
Use only the recommended wire sizes for I/O channels an
d power supplies.
Failure to follow these instructions will result in death or serious injury.
Function
Output Function
Standard Output Pulse Output/
PWM Output
Fast
Output
1
Q0 – X
Q1 – X
Digital
Output
Q2 X –
Q3 X –
Q4 X –
Q5 X –
Q6 X –
Q7 X –
X Yes
– No
1
Can also be used as a Standard output
WARNING
UNINTENDED EQUIPMENT OPERATION
Be sure to wire the outputs correctly according to the wi
ring diagram.
Failure to follow these instructions can result in death, serious injury, or
equipme
nt damage.