Specifications

Programmable Operator Interfaces Programmable Operator Interfaces
[Ethernet]
GP Ethernet I/F Unit <10-Base-T>
(GP070-ET41)
[CC-Link]
CC-Link I/F Unit (GP070-CL11)
[DeviceNet]
Device Net Unit (GP070-DN41)
[Interbus]
Interbus Unit (GP070-IB41)
[Units Supported]
Mitsubishi Electric Corp. PLC
MELSEC A Series
MELSEC QnA Series
[Units Supported]
Fuji Electric Co., Ltd.
MICREX-F Series PLCs
[Profibus-DP]
Profibus-DP I/F Unit (GP070-PF11)
[Units Supported]
SIEMENS
SIMATIC S7-300/400 Series, as well as other Profibus-
DP supporting PLCs.
[T-Link]
T-Link I/F Unit (GP450-ZB21)
* The above communication interface modules are only for GP-470 or larger units.
*1 Manufactured by Total Control Products, Inc.
Additional Fieldbus Network Units Supported:
Interfaces
[Peripheral Device Connections]
Direct connection to various Field networks
becomes possible by attaching communication
modules.
GP47*/57* series GP470/570,GP477R/577R Series
GP270/370 series
GP47*/57* series GP470/570,GP477R/577R Series
GP270 series
GP47*/57* series GP470/570,GP477R/577R Series
GP270 series
QPI-ABR-201
QPJ-ABR-201
QPI-ABD-201
QPJ-ABD-201
QPI-MDP-201
QPJ-MDP-201
Fieldbus
AB Remote I/O
AB DH+
ModbusPlus
Direct Connection to Various Networks
Communication Module Interface
From the touch panel, you can send information
to the PLC or to a machine's DIO I/F in real time.
(Touch output: 8 points; system alarm output:1-point; buzzer
output: 1-point; RUN output: 1-point; remote reset: 1-point)
* Only supported by GP-47* or larger units
Real-time Operation
Auxiliary Input / Output (AUX)
Communication with a Host Controller
Serial (SIO) Interfaces
A single cable is all you need for host
communication, reducing maintenance time.
Connecting to a Color Printer
Printer Interface
You can printout GP screens while in RUN
mode. Alarm history data, including
trigger/recovery times can also be printed.
Screen Data Transfer
Tool Connector
This interface is used for transferring screen data
created by GP-PRO/PB Series. Also, you can
connect a bar-code reader to the GP.
PC Screen Data
VGA Input Interface
Your PC's VGA screen can be displayed on GP-
570VM unit.
Video Display from Cameras
and Recorders
NTSC Video Input Interface (3 channels)
NTSC Video images can be displayed in a
window on certain GPs. Window display size
and position can be changed, in addition to
zooming and channel switching, from touch
panel operation or host controller.
(These features are only supported by GP-570VM unit.)
(Example: GP-675T Rear face)
(GP-570VM)
CCD Camera, VTR,
TV output, etc..
Only for GP-570VM unit.
PC
Interface
VGA
VGA Input Interface (3ch)
RGB Cable
(commercially available type)
* Only supported by GP-47* or larger units
Auxiliary Input/Output (AUX)
Serial Interface
Printer Interface
Tool Connector
DC24V Parallel
I/F cable (user made)
RS-232C (Max 15m)
RS-422 (Max 600m)
* Host controller connection distances differ
Data Transfer Cable
Memory Loader II
Bar-code Reader
* Only supported by GP-470 or larger units
Communication Module Interface
* Only supported by GP-47* or larger units
Signal Tower
Buzzer, etc..
Host Controller
PLC
Single board
Computer
PC
Printer
Communication Module
Data Transfer Cable,
etc..
Direct Connection to Field Network
Max.Baud Rate
Max.Node
Max.I/O
500kbps
64
IN:127 Words
OUT:127 Words
Max.Baud Rate
Max.Node
Max.I/O
12Mbps
64
IN:64 Words
OUT:64 Words
Max.Baud Rate
Max.Node
Max.I/O
500kbps
512
IN:64 Words
OUT:64 Words
Max.Baud Rate
Max.Node
Max.I/O
10Mbps
64
IN:128 Bits
OUT:128 Bits
Max.Baud Rate
Max.Node
500kbps
64
Connectable Barcode Readers
Make Welcome Design
Touch Type Model 1090
Handheld Type Model 1240
Fixed Type Model 1045
Module *
1
GP Model