User`s manual

6 Installation
302 ± 0.5
under 4-R2
228 ± 0.5
1.6mm to 10mm
Panel thickness
Unit: mm


Cut a hole, and mount the GP to the panel from the front.


Attach the Installation Fasteners from behind.
Fasten the screw of the installation fasteners with a screwdriver.
• Tightening the screws with too much force can cause a damage.
• The fastening torque necessary for waterproofing is 0.5-0.6N
•m.
Panel
GP unit


Confirm the Installation Gasket’s Seating
It is strongly recommended that you use the gasket.
Place the GP on a level surface with the display panel facing downward.
Check that the GP’s installation gasket is seated securely into the gasket’s
groove, which runs around the perimeter of the panel’s frame.
Before installing the GP into a cabinet or panel, check that the Installa-
tion gasket is securely attached to the unit.
Installation Gasket
Rear face