User`s manual

An auxiliary interface for touch switch output, system alarm output, RUN

output, and remote reset input.

*1 The AUX Alarm outputs in the following two cases:

• Hardware Alarm (SCREEN MEMORY CHECKSUM ERROR)

• Software Alarm (SYSTEM ERROR, incorrect data that makes continuation

of screen operation impossible.)

Recommended Connector: Dsub 15 pin Plug XM2A-1501 <made by OMRON Corp.>

Recommended Cover: Dsub 15 pin Cover XM2S-1511 <made by OMRON Corp.>

Jack Screw XM2Z-0071 <made by OMRON Corp.>

• Use rough metric type M2.6 x 0.45p threads used to hold the cable’s

set (fastening) screws in place.

5 AUX Interface (Input/Output)

Pin Connection Pin #

Signal

Name

Contents

1TSW0

2TSW1

3TSW2

4TSW3

5TSW4

6TSW5

7TSW6

8TSW7

Touch Switch Output

(8 bit)

9 RUN Output: On in RUN mode;

Off in standby mode or

when the power is off.

10 ALARM Alarm Output: When On,

GP unit alarm origin *1

11 BUZZ Buzzer Output

12 DC24V Output-Common (DC24V)

13 AIN-C Input-Common (DC24V)

14 AOUT-C Output-Common (GND)

15 RESET Reset Input