User`s manual

Chapter 5 - Initializing the GP
GP-477R/577R Series User's Manual
5-22
• When set to the HIGH quality setting, the Level 1 JIS Kanji Code stan-
dard is the object. Level 2 standard characters, no matter what the
setting, display as 16 dots.
The initial screen display upon powering up, the character size when in
RUN mode, and other related general screen items are setup here.
INITIAL SCREEN NO.
Set up the screen file number that will display first upon powering up. If the
BIN option for DATA TYPE OF SCREEN NO in SYSTEM SET UP had been
selected, enter a number from 1 to 8999. Or, if BCD was the option set up,
then input a number from 1 to 1999.
ALARM MESSAGE
Set up the character size of the ALARM MESSAGE when the Alarm Bulletin
is activated.
ONLINE ERROR DISPLAY
Set up whether or not error messages display during RUN mode.
FONT SETTING
Select the character font that displays during RUN mode.
KANJI FONT QUALITY
When “FONT SETTING” is set to “JAPAN” :
When the kanji (Chinese) character quality is set to HIGH, Larger than double
sized (32X32) characters display as 32 dot characters. When STANDARD is
selected, the display becomes a 16 dot font multiple.
When “FONT SETTING” is set to any other setting :
Selecting the HIGH setting will cause single-byte characters (with some ex-
ceptions) to display as high quality characters. Selecting STANDARD will
cause standard single-byte characters to be displayed.
5.8 SET UP SCREEN
Note:
Height=2; Width=2
32×16 pixels
1
2
Height=1; Width=1
16×8 pixels
4
Height=4; Width=4
64×32 pixels