User`s manual

Chapter 5 - Initializing the GP
GP-477R/577R Series User's Manual
5-6
Character String Data ordering varies from manufacturer to manufacturer.
Setup the Character String Data order here to match the corresponding PLC.
4. CHARACTER STRING DATA SETUP
• Setup the CHARACTER STRING DATA MODE to match the
PLC type. Device type and Tag settings are unavailable.
Find the data storage order for your PLC in the table, next page, and setup
the CHARACTER STRING DATA MODE.
(I) Data Device Storage Order
(II) Internal Word Byte LH/HL Storage Order
(III) Internal Double-word Word LH/HL Storage Order
!!
!!
!
Important
windows. Using this same method, adjust the Global window position, by
writing the X,Y coordinates to the SYSTEM AREA's WINDOW LOCA-
TION word addresses.
DATA FORMAT
Setup whether the REGISTRATION NO. and the WINDOW LOCATION values
are inputted as BIN or BCD numbers. This field affects only direct values.
REGISTRATION NO. (1-256)
Setup the Window Screen Number used by the Global Window. This field
is applicable only when the GLOBAL WINDOW ACCESS is set to Indirect.
WINDOW LOCATION
Setup for the Global WINDOW LOCATION. This field is applicable only
when the GLOBAL WINDOW ACCESS is set to Indirect.