User`s manual

Chapter 5 - Initializing the GP
GP-477R/577R Series User's Manual 5-3
STAND-BY MODE TIME (0-255)
To protect the GP display screen, the GP is equipped with a screen saver
function that automatically erases the screen when no GP operations have
occurred for a period of time. A "0" entered in this field causes a normal
display, i.e. the screen is cleared after the GP's standard default time elapses.
When SYSTEM DATA AREA's ( PLC Connection
Manual) SCREEN DISPLAY OFF
*1
data is 1 to FFFFH, and the following
operations are not performed on the screen for the User's designated period
of time, the GP's current display data is cleared.
*2
• Change Screen
• Touch Screen
• Alarm Display
START TIME (0-255)
This setup determines the start-up time of the GP. Use this setup to adjust
the power up sequence so that the GP starts up after the PLC.
TOUCH BUZZER SOUND
Setup whether or not the GP beeps when pressed.
BUZZER TERMINAL OUTPUT
Setup whether or not the BUZZ signal is output from GP's AUX I/F. This
option is for an external buzzer.
PASSWORD SETUP(0-9999)
The password setting is used when changing to the Initialize Memory or
Initialize (OFFLINE mode) Screens. The password (number) ensures
protection of the GP settings as OFFLINE mode will not be entered inad-
vertently. Enter the optional number of your choice. If you do not wish to
use this setup, enter the default 0.
*1 When using the Direct Access or the Memory Link formats, the object address becomes
+9 or +12, respectively.
*2 When the GP is in OFFLINE mode, this feature is not enabled.
5.3 SYSTEM ENVIRONMENT SETUP
1. SYSTEM SETUP
Reference
GP environment adjustments are made here. The SYSTEM ENVIRON-
MENT SETUP includes the SYSTEM SETUP, SYSTEM DATA AREA,
GLOBAL WINDOW SETUP, and CHARACTER STRING DATA SETUP.