Specifications

32/51
・ If the following symptoms appear on Microsoft Windows® 7, go to updating
“USB Data Transfer Driver” on [OtasukePro!] for download
(http://www.pro-face.com/otasuke/download/freesoft/gpproex_transfer.ht
m).
- An error occurs when GP-Pro EX or Transfer Tool is installed
- An error occurs when data is transferred via an USB transfer cable
(model: CA3-USBCB-01).
(2) Turn on the power of GP-4501TW. The “Initial Start Mode” screen will appear on the
display unit. After transferring a project file once, this screen will not appear again.