Specifications

31/51
(1) Open the converted project file (*.prx) on GP-Pro EX.
(2) Click GP-Pro EX’s [System Settings]->[Display] and there change the Display Unit
to GP-4501TW.
(3) Click [Project]->[Save] or [Save As] to save the change.
3.6 Transfer screen data to GP-4501TW
Transfer the project file after conversion to GP-4501TW.
You can transfer data to GP-4501TW via;
・ An USB transfer cable (model: CA3-USBCB-01)
・ An USB data transfer cable (model: ZC9USCBMB1)
・ A commercial USB cable (USB Type A/mini B)
・ A SD card/A USB storage device
・ Ethernet
But this section explains, as an example, how to transfer screen data with an USB
transfer cable (model: CA3-USBCB-01).
(1) Connect your PC and GP-4501TW with an USB transfer cable (model:
CA3-USBCB-01). If the driver of the cable has not been installed on your PC yet, a
dialog box will appear. Please follow the instructions.
NOTE
・ The “Hardware Installation” dialog box as shown below may appear during
installing the USB driver depending on the security level of Windows® XP.
Click [Continue Anyway] to start installing the driver. When installation is
completed, click [Finish].