Specifications

29/51
(7) After conversion, the [Save convert information] dialog box appears. If you click
[Save], you can save the conversion information in a CSV file format.
NOTE
Because the differences made at the time of conversion from GP-Pro/PBIII for
Windows are described in the CSV saved file, the project file (*.prx) after
conversion can be checked and modified according to the conversion
information.
(8) Click [Close] to close the [Project Converter] dialog box.
If you double click the project file (*.prx) after conversion, GP-Pro EX will start and the
file will open.
IMPORTANT
When the settings for the both COM1 and COM2 ports are configured for
GP-2500T/S/L, the settings for the COM2 port are not converted on GP-Pro EX. If
you still need the settings of the COM2 port for GP-2500T/S/L, add Device/PLC
setting from [System Settings] on the [Project] menu of GP-Pro EX.
Convert GP-PRO/PBIII for Windows “Destination CF Card Folder”
If you convert a project file (*.prw) with a destination CF card folder designated in the
step 6, the Question dialog box asking whether or not to designate the destination CF
card folder for the convert destination appears again.