Specifications

15/51
and the functions using the CF card, use a SD card or a USB flash drive instead.
* When using a SD card with GP-4501TW, please verify it supports the following
specifications:
File format
Maximum capacity
SD
FAT16
2GB
SDHC
FAT32
32GB
For the GP-PRO/PBIII’s “CF Card output folder” setting, if project file is converted on
GP-Pro EX, the setting will automatically change to the one that uses a SD card.
To change the setting of the output destination folder, see [5.1 Changing the setting
of the external media to use].
2.6 Peripheral units and options
2.6.1 Barcode reader connection
GP-4501TW is not equipped with a tool port. A barcode reader that used to be
connected to the tool port on GP-2500 series cannot be used. However, GP-4501TW
allows you to connect a barcode reader on its USB interface (Type A) or its serial
interface.
For the models GP-4501TW supports, see [OtasukePro!]
(http://www.pro-face.com/otasuke/qa/3000/0056_connect_e.html).
2.6.2 Printer Connection
GP-4501TW is not equipped with Centronics (parallel) Interface for a printer though
GP-2500 series is equipped with it. If the printer for GP-2500 series is used for
GP-4501TW, a converter that converts USB interface on GP-4501TW to Centronics
interface is required. And GP-4501TW allows you to connect a printer on its USB port.
For the models GP-4501TW supports, see [OtasukePro!]
(http://www.pro-face.com/otasuke/qa/3000/0056_connect_e.html).
2.6.3 Expansion Unit
GP-4501TW is not equipped with an expansion unit interface. The expansion unit
(each kind of unit like CC-LINK Unit) for GP-2500 series cannot be used.
2.6.4 Front Maintenance Unit
The front maintenance unit for GP-2500 series (GP077-CFFM10) cannot be used for
GP-4501TW.