Specifications

14/51
2.4 Transfer cable
To transfer screen data to GP-4501TW, use a USB transfer cable or Ethernet.
The USB cables that can be used for GP-4501TW are as follows:
Model
Connector Type
Connector on GP
Options
CA3-USBCB-01
USB (Type A)
ZC9USCBMB1
USB (Type mini B)
Commercial Item
-
Please note that the cables (GPW-CB02, GPW-CB03, GP430-CU02-M) for GP-2500 series
cannot be used for GP-4501TW.
2.5 Interface
2.5.1 Serial Interface
The pin assignment and the shape of plug/socket connector of GP-2500 series are
different from those of GP-4501TW.
To know the details about them, see [4.2 Shapes of COM ports] and [4.3 Signals of
COM ports].
Because of it, the existing PLC connection cables cannot be used as they are. If you
use the existing connection cables for GP-4501TW, see [4.6 Cable Diagram at the
time of replacement].
And even though the both COM1 and COM2 ports on GP-2500T/S/L are used with
RS-232C setting, only the COM1 port can be used for GP-4501TW. In this case,
please contact our sales office in your region.
(http://www.pro-face.com/customer/contact.html)
2.5.2 Auxiliary I/O Interface (AUX)
GP-4501TW is not equipped with Auxiliary I/O Feature. External Reset Input and 3
Outputs (RUN Output, System Alarm Output, and External Buzzer Output) that can
be used for GP-2500 series cannot be used.
2.5.3 Sound Output Interface (for GP-2500T/S/L only)
GP-4501TW is not equipped with the sound output function. The sound output
function for GP-2500T/S/L cannot be used.
2.5.4 CF Card Interface
GP-4501TW is not equipped with a CF card slot. But a SD card slot and a USB
interface are installed. In order to use the GP-2500 series data saved in the CF card