User guide

With the transmitter antenna up, maneuver the Miss

LLumar in an oval, turning only to the right at slow

to medium speeds. Make certain that the boat and

radio system are functioning correctly.

As you are running the Miss LLumar in an oval,

watch for water being discharged from the water

outlet on the left side of the hull. Water flowing

from the water outlet indicates the engine is

being properly cooled. If you do not notice any

water coming from the water outlet, bring the

boat in and make sure that the water cooling line

or the brass water pickup located near the rudder

are not clogged.

If at anytime you notice the boat and/or radio

system are not functioning correctly, end the

operation of the boat immediately and do not run

the boat again until you are confident the problems

have been corrected.

Idle the boat near shore and press the kill switch

located on top of the cockpit as shown.

Section 12: Initial Launch of the Miss LLumar

Section 11: Stopping the Engine