Manual
Table Of Contents
- Introduction
- Warning
- Table of Contents
- Additional Required Items
- Suggested Field Equipment and Supplies
- Warranty Information
- Contents
- Section 1: Receiver and Transmitter Battery Installation
- Section 2: Turn Fin
- Section 3: Filling the Fuel Tank
- Section 4: Range Checking the JR Python Radio System
- Section 5: The Dynamite .15S Marine Engine
- Section 6: Engine Troubleshooting Guide
- Section 7: Maintainance
- Replacement Parts
Section 1: Receiver and Transmitter Battery Installation (cont.)
6
7. Re-install the battery holder back into the
radio box and properly seal the radio box with
clear tape. Failure to properly seal the radio box
could result in damage to your radio equipment.
8. Re-attach the tuned pipe and coupler to the
exhaust manifold.
9. Re-install the tuned pipe mount.
Transmitter Batteries
1. Remove the transmitter from the box
2. Remove the battery cover on the bottom of
the transmitter.
3. Note the proper polarity and insert 8 “AA”
batteries into the transmitter.
4. Turn on the radio to ensure the batteries have
been installed correctly.
5. Turn the radio off.