Jet Jam 12-Inch Pool Racer RTR Manual

Installing the Battery Pack

Placing the Decals

Jet Jam

Recommended Tools and Materials

• Needle nose pliers

• Paper towel

• Rubbing alcohol

• Phillips screwdriver: #1, #2

• Hex drivers: 1.5mm and 2mm

• Clear tape (DYNM0102)

• ProBoat

Marine Grease and Gun (DYNE4200)

1. Remove the canopy from the hull by rotating the

canopy latch to the left or right and pulling up on

the back of the canopy.

2. Install the fully charged battery in the compartment

by securing it into the battery cradle with the battery

cable toward the front of the boat.

3. Connect the battery to the ESC/Receiver.

Box Contents

• ProBoat

Jet Jam™ 12-Inch RTR Pool Racer

• Horizon 2.4GHz Transmitter (HRZ00020)

• Horizon ESC/Receiver (HRZ00017)

• Horizon Servo (HRZ00009)

• Dynamite

7.4 1500 mAh 2S 15C Li-Ion Battery (DYNB0110)

• ProBoat

USB Charger (PRB18019)