Installation Manual

For further information on installation instructions and warnings please visit our website WWW.PROARMOR.COM or contact
Customer Service at 1-888-31-ARMOR
PARTS:
1. DRIVER SIDE DOOR 1
2. PASSENGER SIDE DOOR 1
3. HARDWARE KIT 1
DOOR INSTALLATION PREP:
1. Remove the stock doors and save the hardware from the cage tube connectors. This hardware will be used
for the install of your Pro Armor doors.
2. Do not remove the stock door latch catch. This will also be used.
3. Remove both the driver and passenger seats to make more space and easier area to work in.
4. You will need to remove the stock paddle latch from the stock door. Refer to the pictures below.
5. Remove the 4 T25 torx screws
holding the stock door cover onto
the frame (circled in red). Remove
the 2 T30 torx bolts holding the
paddle latch onto the frame (cirled in
blue). Keep these 2 bolts, you will
use them later.
6. Pull the frame away from the plastic cover
and remove the paddle latch from the door.