Product Manual

7
Continuous Test
Select Continuous Test and press ENTER to cycle the settings to Off or On.
When the selection is correct, select EXIT and press ENTER to return to the Main
Menu.
Continuous Test – Off (Single Test Mode)
Test one strip at a time. Single Test Mode performs 60 tests / hour.
Continuous Test - On
Test strips one after another. Continuous Test Mode performs up to 120 tests
per hour. When Continuous Test is on, the
symbol will be displayed.
Operator ID
Select Operator ID and press ENTER to increase the number by one. After 10, it
reverts back to 01. If User Login is enabled and Operator ID is 11 through 20,
this setting cannot be changed. Select EXIT and press ENTER to return to the
Main Menu.
Units
Select Units and press ENTER to cycle the units between Conventional or SI
units. If User Login is enabled and Operator ID is 11 through 20, this setting
cannot be changed. Select EXIT and press ENTER to return to the Main Menu.
Note: Arbitrary results will always be printed.
Analyzer Configuration
Select Analyzer Configuration from the Main Menu to display the screen below.
Press ▲ or ▼ to move → to make changes. After all changes are made, select
EXIT and press ENTER to save changes and return to the Main Menu. If User
Login is enabled and Operator ID is 11 through 20, this Menu cannot be changed.
Printer Setup
Select Printer Setup to display the screen below.