Product Manual

6
Mode
There are three test mode options. Press ENTER when Mode is selected to
change the Mode.
Note: The Mode can be changed during normal testing for STAT tests.
Routine Test
Use for normal urine testing. The default test number ranges from 1 to 99999. It
resets to 1 every day automatically if Auto Number Reset is set to Yes.
STAT Test
Use for emergency urine testing. The default test number is from 100001 to
199999. It resets to 100001 each day automatically if Auto Number Reset is set
to Yes. The analyzer will automatically switch to STAT test and can not be
changed if the QC test has failed.
QC Test
Use to test positive/negative controls. If QC lockout is on, this test will be run
automatically. The test number ranges from 200001 to 299999. It resets to
200001 every day automatically if Auto Number Reset is Yes.
Note: Ensure QC Test mode is used for testing positive and negative
controls. Use of any other mode will report the testing results as a
regular specimen and will not display proper “Pass/Fail” QC test
results.
Test Number
Select Test Number and press ENTER.
Enter the new Test Number. Press ENTER to confirm. Press CANCEL to
delete any changes and keep the existing number.
The first digit in the number will depend on the Test Mode. The first digit will be 0
for Routine, 1 for STAT and 2 for QC Test. This first digit is fixed and cannot be
changed from this screen. Tests run after this number is changed will be set
sequentially from the new number.
Note: Specimens may be assigned the same test number. They will be
distinguished by test date and time in the Database.