Product Manual

34
Section 9 Precautions
Follow the precautions listed below for accurate results and operation of the
analyzer.
• The protection provided by the equipment may be impaired if used in a
manner not defined in this user guide.
• Connect to a power connection which contains a working grounding plug.
• Wear gloves to avoid contact with potentially hazardous biological
samples during processing strips, or analyzer components.
• Avoid storing or operating the analyzer in direct sunlight, excessive
temperature or humidity. Refer to Appendix 1 Urine Analyzer
Specifications for operating condition requirements.
• Never place anything within 7 cm of the front of the unit. This will avoid
interference with the Strip Holder.
• Keep the unit clean. Wipe it frequently with a soft, clean and dry cloth.
Use fresh water when needed.
• Do not clean the unit with substances such as gasoline; paint thinner,
benzene compounds or other organic solvents. This will avoid any
damage to the Strip Holder, White Calibration Circle, or other
components.
• Do not wash the LCD with water. Lightly wipe the LCD with a clean, soft
and dry rag.
• The Strip Holder must be kept clean. Wipe the Strip Holder using fresh
water daily. Refer to Daily Cleaning in Section 8.
• Follow all local regulations when discarding the unit or its accessories.
• Do not use the unit or the strips outside of the operating temperature
ranges listed below.
Analyzer: 0-40ºC (32-104ºF)
Strips: 15-30ºC (59-86ºF)