Product Manual

31
Section 8 Maintenance
Loading Printer Paper
Pull up on the finger pull area marked to open the Printer Cover.
Place paper roll in the printer box. The paper comes from the bottom of the roll up
into the printer.
Caution: The printer will only print on the outside surface of the roll. If
placed incorrectly, there will be no printout.
For easy printer paper loading, bend the leading edge of the
printer paper upward toward the back of the analyzer. Push the
leading edge of the printer paper through the feed and the printer
paper will now easily feed through the Printer Roller.
A green Paper Release Lever is located near the Printer Roller. Press the back
end of the Paper Release Lever towards the front of the analyzer to release the
pressure on the Printer Roller. Feed the paper under the Printer Roller until the
end shows above the roller.
Pull the paper up. Leave 10 cm (4 inches) of extra paper above the Printer Roller.
Press the front end of the green Paper Release Lever down to lock the Printer
Roller.
Thread the excess paper through the Printer Paper Access Slot in the Printer
Cover. Return the Printer Cover to its original closed position.