Product Manual

Using the keypad or barcode reader to enter the Barcode ID, press ENTER to

confirm the ID entered and enter the next number.

Press CLEAR to clear the entered ID. Press PRINT to print the list of IDs.

CANCEL to exit to the previous screen.

Press START to save the IDs and return to the previous screen.

Up to 100 barcodes can be read. The screen will indicate how many barcodes

have been read.

Note: Do not change Barcode Reader or Test number settings before all

barcodes have been processed. Otherwise remaining barcodes

may be deleted.

Press START to begin strip testing. The testing screen will be displayed as

shown below. This screen example shows a total of 10 strips to be run. It asks

for the first strip to be placed on the Strip Holder.

The next screen shows the barcode of the sample to be run and the next sample

ID to be run. This reduces the possibility of error and mismatch between the

barcode and the sample to be run.