Product Manual

Press ▲ or ▼ to move the → to make changes. If Passcode is blank, user login

is not yet enabled and only Change Admin Passcode can be chosen. Select

Exit and press ENTER to save changes.

Change Admin Passcode

Change the passcode from blank to a valid passcode, select Change Admin

Passcode and press ENTER.

A non-blank passcode must be entered to enable User Login. If a blank is

entered, a new screen will indicate the passcode is invalid. After 3 seconds, the

screen will return to the login screen.

Press CANCEL to keep the existing passcode and exit.

Scan or enter a valid Passcode and press ENTER to accept and exit. User