Product Manual

14
Setting the QC Values
From the Initial Screen, enter the passcode 420024 to show the QC value setup
screen.
Press ▲ or ▼ to change the highlighted digit. Press ◄ or ► to move to the digit
to be changed. Press ▲ or ▼ to increase or decrease the value. Change each
of the analyte QC values in this manner until the desired values are shown.
Press ENTER to save the changes and exit the screen. Press PRINT to print the
current values.
User Login
Press ENTER from the Initial Screen to show the Administrator login screen. The
Operator ID is preset to 100.
On entry to this screen for the first time, leave the Passcode blank and press
ENTER.
Press CANCEL to return to the Initial Screen without enabling User Login.
ID Admin
The Administrator screen is shown.