Product Manual

12
Press Print to print a record once it is displayed.
Press ▼ to view the previous record. Press ▲ to view the next record.
Press CANCEL to return to the previous screen.
Self Test
Select Self Test and press ENTER to perform self tests. A results screen will
display the results of each test.
After each test, a pass or fail is displayed on the screen. If any results fail, the
unit will not operate. Refer to Section 10 Troubleshooting.
Press CANCEL to return to the Main Menu.
QC Test
Select QC Test and press ENTER. If User Login is enabled and Operator ID is
11 through 20 the operator can only view settings and run a QC test.
Press ▲ or ▼ to move → to make changes. Select Exit and press ENTER to
save changes.
QC Setup
Select QC Setup and press Enter.