Operation Manual

ELECTRICAL CONNECTION

For Great Britain only

Warning - this appliance must be earthed

Fuse replacement

If the mains lead of this appliance is fitted with a

BS 1363A 13amp fused plug, to change a fuse in this type

of plug use an A.S.T.A. approved fuse to BS 1362 type and

proceed as follows:

1. Remove the fuse cover (A) and fuse (B).

2. Fit replacement 13A fuse into fuse cover.

3. Refit both into plug.

Important:

The fuse cover must be refitted when changing a fuse and

if the fuse cover is lost the plug must not be used until a

correct replacement is fitted.

Correct replacement are identified by the colour insert or

the colour embossed in words on the base of the plug.

Replacement fuse covers are available from your local

electrical store.

For the Republic of Ireland only

The information given in respect of Great Britain will

frequently apply, but a third type of plug and socket is also

used, the 2-pin, side earth type.

Socket outlet / plug (valid for both countries)

If the fitted plug is not suitable for your socket outlet,

Please contact Whirlpool Service for further instruction.

Please do not attempt to change plug yourself. This

procedure needs to be carried out by a qualified Whirlpool

technician in compliance with the manufactures

instructions and current standard safety regulations.