Operation Manual

EN7
For each connection to the network, the hob automatically checks for a few seconds.
Connection to the oven
WARNING
Do not connect the oven to the power supply before you have finished connecting the cooktop.
•Before connecting the oven to the power supply, make sure that the cooktop is among the ones listed in the cooktop/oven pairing product sheet provided.
• Connect the hob connectors (E) to the oven connectors (D), matching the colours and the alignment of the housing guides visible on the top of the connectors.
• Then make the connection by pushing the connectors all the way in, making sure that the tongue clicks into place.
• Unscrew the nut of the earth screw (K) on the top cover of the oven and insert the yellow/green earth wire, leaving the washer in place. Screw the nut back
onto the screw and tighten it as far as it will go.
• Cover the connected cables (H) with the metal cover (F), taking care that the cables are not trapped under the cover.
• Tighten the two screws (G) to secure the metal cover provided with the oven.
CBA
Colour Grey
Colour Blue
Colours Brown
Colour Black
Colour Yellow-Green
N1 N2L1 L2E N1 N2L1 L2E
N1 N2L1 L2E N1 N2L1 L2E
L1
L2
N2
N1
N