User manual

Door reversal

(Fig. 3)

Unplug the appliance before all operations.

To reverse the door, proceed as follows:

dismantle the lower hinge (3), pin (1), the threaded in-

sert (4) and the screw (2);

slide the door out from pin (5), unscrew the pin and

reposition on the opposite side;

unscrew the left front foot and reposition on the oppo-

site side;

unscrew the two screws which mask the holes for ﬁx-

ing the hinge from the left front side;

reassemble the door;

reassemble the lower hinge (turning it 180

), the

threaded insert, the pin and the screw on the opposite

side, as shown in the ﬁgure;

dismantle the handle (6) and reassemble it on the op-

posite side.

Attention

After completion of the door reversibility operation,

verify that the door gasket is adherent to the cabinet.

If the ambient temperature is cold (i.e. in Winter), the

gasket may not ﬁt perfectly to the cabinet. In that

case, wait for the natural ﬁtting of the gasket or accel-

erate this process by heating up the part involved with

a normal hairdrier.

Fig. 3

D193

180°