Instructions / Assembly

6
Installation (continued)
4
Securing the canopy and glass
5
Installing the bulbs
□ Place the canopy (A) over the outlet box.
□ Align the nipple (GG) to protrude through the
appropriate hole on the canopy (A).
□ Screw the lock nut(EE) onto the nipple(GG).
□ Place the five glass panels(C) into the four sides and
the bottom of the fixture frame(D),then use the top and
bottom clips(G) to secure the glass panels(C).
□ Screw two 60-Watt maximum, incandescent. medium-
base bulbs (not included) into the sockets (B).
NOTE: You can use LED equivalent energy-saving
bulbs that does not exceed 8 Watts (not included).
6
Securing the fixture frame
7
Applying caulk
S
e
c
□ Place the fixture frame (D) over the canopy(A).
□ Align the screws (F) on the canopy(A) to protrude
through the holes on the top of the fixture frame (D).
□ Secure the fixture frame(D) and the canopy (A) by
screwing the two lock nuts(E).
□ Caulk the space between the ceiling and the fixture
frame (D) to prevent water seeping into the outlet box.