Instructions / Assembly

5 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Installation
1
Separate the canopy and the fixture
frame
2
Attaching the mounting bracket
to the outlet box
□ Unscrew and remove the lock nut(EE) from the nipple
(GG).
□ Unscrew and remove the lock nut (E) from the fixture
frame (D).
□ Separate the canopy(A) and the fixture frame (D).
□ Place the outlet box screws (DD) through the long oval
holes on the mounting bracket (AA), and screw them
into the threaded holes on the outlet box(not
included).
□ Screw the nipple(GG) about 6mm(adjust the length
according to the actual situation)into the mounting
bracket(AA).
□ Tighten the hex nut(FF) against the mounting
bracket(AA) to secure the nipple(GG).
3
Making the electrical connections
□ Wrap the ground wire from the fixture around the
ground screw (CC) on the mounting bracket (AA).
□ Use a wire connector (BB) to connect the ground
wire from the fixture to the ground wire from the
outlet box.
□ Use a wire connector (BB) to connect the white wire
from the fixture to the white wire (neutral) from the
outlet box.
□ Use a wire connector (BB) to connect the black wire
from the fixture to the black wire (live wire) from the
outlet box.
□ Wrap the three wire connections with electrical tape
for a secure connection.
□ Position the wires back inside the outlet box.