Instructions / Assembly

3 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Pre-Installation
PLANNING INSTALLATION
Read all instructions before assembly. Before starting installation of this fixture or removal of a previous fixture, disconnect
the power by turning off the circuit breaker or by removing the fuse at the fuse box. To avoid damaging this product,
assemble it on a soft, non-abrasive surface such as carpet or cardboard.
TOOLS REQUIRED
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
NOTE: Keep your receipt and these instructions for proof of purchase.
NOTE: The insulation is located on both sides of the canopy. It is required by UL and included to protect the
light fixture from the heat caused by the light bulb(s).The insulation should not be removed.
Wire
Strippers
Safety
Goggles
Ladder
Gloves
Flathead
Screwdriver
Phillips
Screwdriver
Electrical
Tape
Wire
Cutters
Part
Description
Quantity
AA
Mounting Bracket
1
BB
Wire Connector
3
CC
Ground Screw (8 mm)
1
DD
Outlet Box Screw (15 mm)
2
EE
Lock Nut
1
FF
Hex Nut
1
GG
Nipple (30 mm)
1